The Life of Projector Lamps: Make It as Long as Possible

The thing about projector bulbs is that they may stop working at some point in time and in the worst cases you may not be able to explain why.

Reason – like the usual bulbs, the projector lamp is a delicate object albeit much more expensive than a lot of your household bulbs. Therefore, it is important to ensure that the lamps last long enough – so you’re not overspending on these lamps. It is rather surprising to see that some places only need a new projector lamp every now and then, while others may require these bulbs every few months.

Considering this problem of changing projector lamps frequently, here are some things that need to be considered so as to extend the life of these lamps as long as possible.

1.      Buy lamps from a reputed store – Considering that the problem with the projector lamps is usually due to quality, it is important to buy lamp from a reputed store. Make sure you choose a seller that sells not only an array of products but also ensures that each of those are of the highest quality and will perform well for a longer duration of time.

 

Make sure you check for the warranty of the products that you are buying and a seller that promises this warranty.

 

One thing to understand here is that when you choose reputed seller, you’re also choosing an improved life of bulbs for your projector and are ultimately saving a lot of your precious time and money.

 

2.      Keep the projector as room temperature – Another important thing that you can do to improve the life of the projector bulbs in your home is to keep them at room temperature.

 

One thing to take a note of here is that a quick change in the temperature will cause a projector lamp to blowup if you ever switch a cold projector on so make sure you let it to warm up to the regular room temperature first. Never leave the projector in the car or in any extreme heat because this will cause the projector lamp to heat up and burn.

 

3.      Check for overheating – Overheating could be a major problem with projector lamps and of you see the lamp overheating, then it will burn out earlier than it should otherwise. The main reason around the overheating problem is usually when the users do not clean the projector filter regularly.

Remember it is important to clean the filter once in three months using a can of compressed air but the frequency should be increased to monthly if the projector is in a dusty environment. Another reason for the overheating to occur is the blockage in the fan exhaust so take into consideration where the fan is on your projector and make sure it has a minimum of two or three feet room to breathe.

 

While the overheating may occur but there is one thing that you most certainly need to consider – never touch the lamp because your fingers have natural oil on them and this can also be a cause for the projector lamp to overheat and cause premature burning. You should only be touching the metal housing.

 

4.      Let the projector cool down – A number of projectors have the tendency to power down on their own so make sure you do not move the projector while it is in this mode. When people do not allow the lamp to cool down before they move the projector or switch it back on the chances of the bulbs dysfunction and may require replacing more often.

 

If you have an older projector model then you might have an on/off switch different for the bulb and the machine. In this case, you need to switch the projector bulb off first and then the projector itself.

 

In a similar way, make sure you do not move / shake / bump the projector whilst the projector is still in a switched on mode. What you need to consider here is that these are absolute sensitive and any such movement could cause the projector to simply blow up.

 

5.      Save projector lamp hours – These days most projectors are called an economy or eco-mode and this is because they use less brightness from the projector bulb, thus meaning that the lamp will last much. So make sure you’re saving some important projector lamp hours for a more efficient working of the lamps.

Having said of all these points mentioned above, make sure you’re doing just enough to take care of the projector bulbs in your house, and eventually to improve their performance life.

However, apart from all of these details mentioned above, if you are looking for some high end projector bulbs that work just the way you need them to then choosing Aussie Lamp Centre does the work for you. Aussie Lamp Centre you can choose from a range of options available for a variety of purposes and at extremely budget friendly prices.

For more details about the lamps concerning the type, quality, as well the cost, log on to https://www.aussielampcentre.com.au/.